Provision-ISR NVR-16400 Uživatelský manuál stáhnout pdf (Strana 17)

Step 3: Choose the searched devices and click “OK” button to add these devices. The added

cameras will be listed in the device management interface.

Step 4: Choose the camera device and click “Setup” button to enable the camera. Refer to Fig

4-3. Check the “Enable” checkbox, select channel and input the username and password of

this device. Then click “OK” to save settings.

Fig 4-3 Add Device

To add IP cameras via WAN:

Step 1: Please enter MenuIP Camera tab. Refer to Fig 4-1.

Step 2: Click “Add” button to pop up a window similar to Fig 4-3. You need to check

“Enable” box, select channel, manufacturer and product model and manually input IP address,

server port, username and password of this device.

Note: If the NVR and the IP cameras you want to add are in WAN, the IP address of the

IP camera input here must be WAN IP. You should forward the LAN IP address and port

of the IP camera in the router and use its WAN IP address, provided that the IP camera

is in local area network, otherwise, the NVR cannot connect this IP camera.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 73 74

Žádné komentáře

Provision-ISR NVR-16400 Uživatelský manuál Strana 17